 |
| Minimum Order Quantity: | 100 |
|---|---|
| Packaging Details: | Original packing |
| Delivery Time: | 1-12 weeks |
| Payment Terms: | T/T |
| Maximum Range: | 800A~1200A | Sensitivity: | G=2000/IP |
|---|---|---|---|
| Phase Difference: | -4 | Magnetic Zero Offset: | ±3 |
| Electrical Zero Offset: | ±4 | Zero Output Error: | -1 1 |
| High Light: | 1200A Pulse Current Transducer,2us Response Pulse Current Transducer |
||
product manual
NACA XXXQ3-S6/VA series triple current sensor is suitable for accurate measurement of AC, DC and pulse current isolation. The primary side and the secondary side are completely insulated during measurement.
| Performance requirements | ||||||
| parameter name | symbol | unit | parameter | condition | ||
| Minimum | Typical value | Max | ||||
| Electrical parameters | ||||||
| Maximum range | IP | A | 800A~1200A | For more details, please contact CRRC | ||
| Storage temperature | TS | °C | -40 | 125 | ||
| voltage | UC | V | 4.75 | 5 | 5.25 | |
| Output voltage (linear) | Vout | V | Vout=(Uc/5)·(V0+G·Ip) | @UC | ||
| Sensitivity | G | mV/A | 2000/Ip | @UC=5V | ||
| Zero output | VO | V | 2.5 | @UC=5V | ||
| Current consumption | IC | mA | 39 | 45 | @ UC=5V,No load on Vout | |
| Load Resistance | RL | KΩ | 4.7 | 10 | ||
| Load capacitance | CL | nF | 5 | |||
| Output internal resistance | ROUT | Ω | 2 | 4 | 8 | DC |
| Performance parameter | ||||||
| Zero output error | X0 | % | -1 | 1 | @TA=25℃,@UC=5V | |
| -1.5 | 1.5 | @-40℃＜TA＜125℃,@UC=5V | ||||
| Sensitivity error | εG | % | ±1 | @TA=25℃,@UC=5V | ||
| ±2 | @-40℃＜TA＜125℃,@UC=5V | |||||
| Electrical zero offset | FLY | mV | ±4 | |||
| Magnetic zero offset | FROM | mV | ±3 | |||
| Proportional error | .R | % | 0.5 | |||
| Linearity error | εL | % | -1 | 1 | of full range | |
| Response time | tr | μs | 2 | |||
| bandwidth | BW | kHz | 40 | @ -3dB | ||
| Phase difference | ∆φ | ° | -4 | @DC to 1kHz | ||
| Dimensions |
| Series size |
 |
Procurement information
1. Products can be customized according to your needs. You are welcome to provide physical samples or detailed process drawings to design, produce and process. 2. If there is no special requirement, our company will assign logistics distribution and deliver the goods to customer factory
3. Payment method: delivery after payment, which can be negotiated according to the specific order quantity.
4. The response time of the number of customers should not exceed 8 working hours.
5. Emergency on-site service time shall not exceed 24 hours.
6. Provide emergency support for customer's urgent shortage of spare parts.
Contact Person: Miss. Elaine
Tel: +86 18150151931
Fax: 86-592-2611505
