Home ProductsCurrent Transducers

Magnetic Balance 2000A Hall Effect Current Transducer

Magnetic Balance 2000A Hall Effect Current Transducer

  • Magnetic Balance 2000A Hall Effect Current Transducer
Magnetic Balance 2000A Hall Effect Current Transducer
Product Details:
Payment & Shipping Terms:
Minimum Order Quantity: 100
Packaging Details: Original packing
Delivery Time: 1-12 weeks
Payment Terms: T/T
Contact Now
Detailed Product Description
Rated Measuring Current IPN (A): 2000 Measuring Range IP (A): 0~±3700
Turns Ratio: 1:5000 Power Supply Voltage VC (V): DC±(15~24)×(1±10%)V
Rated Measurement Output ISN (mA): 400mA Secondary Side Current Consumption IC (@±24V): ≤35mA+
Isolation Withstand Voltage: 12kVrms/50Hz/1min Linearity δL (@IPN,TA=25℃): ≤±0.1%
High Light:

2000A Hall Effect Current Transducer


Magnetic Balance Hall Effect Current Transducer

NT2000C-S/SP1( NACL.2000B1-S4 ) current sensor

Product Details

product manual

The magnetic balance Hall current sensor is suitable for accurate measurement of AC, DC and pulsating current isolation. The primary side and the secondary side are completely insulated during measurement.


product advantages Applications Reference standard
High precision AC inverter AC EN50178
Good linearity Battery powered
Low temperature drift Converter/Inverter
Broadband UPS/SVG
Quick response  


Main electrical parameters
Rated measuring current IPN (A) 2000
Measuring range IP (A) 0~±3700
Turns ratio 1:5000
Power supply voltage VC (V) DC ± (15 ~ 24) × (1 ± 10%) V
Rated measurement output ISN (mA) 400mA
Measuring resistance RM (Ω)  

70℃ 85℃

@ ± 15V, ± 2000A: 0Ω ~ 7.5Ω

@ ± 15V, ± 2400A: 0Ω ~ 4Ω

@ ± 24V, ± 2000A: 3Ω ~ 27.5Ω

@ ± 24V, ± 3700A: 0Ω ~ 3Ω

Secondary side current consumption IC (@±24V) ≤35mA+
Isolation withstand voltage 12kVrms/50Hz/1min


Accuracy-dynamic parameters
Basic error δi
Linearity δL
Zero output current IO
(@IP=0, TA = 25℃)
≤ ± 0.5mA
Zero temperature drift IOT ≤ ± 0.8mA (-50 ℃ ~ + 85)
Response time ≤1µS
di/dt accuracy >100A/us
Frequency bandwidth BW DC..100kHz


General data
Working temperature Ta -40℃~+85℃
Storage temperature Ts -45℃~+90℃
weight ≤1700g


Magnetic Balance 2000A Hall Effect Current Transducer 0



Mechanical characteristics
No tolerance ±1 mm
Sensor installation method one (recommended)

4 hole ø6.5mm

4 M6 steel screws

Recommended torque 4.5 N·m
Busbar size (recommended) Ø60.5mm
Secondary side electrical connection (RVVP3×16/0.15)



1. When the measured current direction is consistent with the direction marked on the sensor, the sensor output ISN is positive.
2. The secondary side connection line of the product is preferably a shielded line. The shielding layer is close to the product end and the connection line can be connected to the case, and the negative power supply or power supply 0V.
3. The verticality requirements for the mounting screw holes of the power sensor: it is required to be level 8 or above (or below 0.06) in the national standard.
4. The flatness requirements for the installation surface of the power sensor:
(a). The flatness of the large plane installation is national standard 11 or above (or the flatness is less than 0.25mm);
(b). The flatness of the installation surface is designed with small round bosses It is required to reach the national standard level 12 or above (or the plane fluctuation is less than 0.5mm);
5. No tolerance ±1mm is noted;


Contact Details
Xiamen Sincery Im.& Ex. Co., Ltd.

Contact Person: Miss. Elaine

Tel: +86 18150151931

Fax: 86-592-2611505

Send your inquiry directly to us (0 / 3000)

Other Products