Home ProductsCurrent Transducers

EN50155 1000A Hall Effect Current Sensor For Converter

EN50155 1000A Hall Effect Current Sensor For Converter

  • EN50155 1000A Hall Effect Current Sensor For Converter
EN50155 1000A Hall Effect Current Sensor For Converter
Product Details:
Payment & Shipping Terms:
Minimum Order Quantity: 100
Packaging Details: Original packing
Delivery Time: 1-12 weeks
Payment Terms: T/T
Contact Now
Detailed Product Description
Rated Measuring Current IPN (A): 1000 Measuring Range IP (A): 0~±2100
Turns Ratio: 1:5000 Power Supply Voltage VC (V): DC±(15~24)×(1±5%)V
Rated Measurement Output ISN (mA): 200mA Secondary Side Current Consumption IC (@±24V): ≤35mA+
Isolation Withstand Voltage: 3.8kVrms/50Hz/1min Basic Error δi (@IPN,TA=25℃): ≤±0.4%
High Light:

1000A Hall Effect Current Sensor

,

EN50155 Hall Effect Current Sensor

NT1000D-S/SP1 current sensor

Product Details

product manual

The magnetic balance Hall current sensor is suitable for accurate measurement of AC, DC and pulsating current isolation. The primary side and the secondary side are completely insulated during measurement.

 

product advantages Applications Reference standard
High precision AC inverter AC EN50178
EN50155
Good linearity Battery powered
Low temperature drift Converter/Inverter
Broadband UPS/SVG
Quick response  

 

Main electrical parameters
Rated measuring current IPN (A) 1000
Measuring range IP (A) 0~±2100
Turns ratio 1:5000
Power supply voltage VC (V) DC ± (15 ~ 24) × (1 ± 5%) V
Rated measurement output ISN (mA) 200mA
Measuring resistance RM (Ω)  

70℃ 85℃

@ ± 15V, ± 1000A: 0Ω ~ 23Ω 0Ω ~ 19Ω

@ ± 15V, ± 1300A: 0Ω ~ 7Ω

@ ± 24V, ± 1000A: 0Ω ~ 63Ω 10Ω ~ 61Ω

@ ± 24V, ± 2100A: 0Ω ~ 6Ω

Secondary side current consumption IC (@±24V) ≤35mA+
Isolation withstand voltage 3.8kVrms/50Hz/1min

 

Accuracy-dynamic parameters
Basic error δi
(@IPN,TA=25℃)
≤±0.4%
Linearity δL
(@IPN,TA=25℃)
≤±0.1%
Zero output current IO
(@IP=0, TA = 25℃)
≤±0.4mA
Zero temperature drift IOT ≤ ± 0.8mA (-40 ℃ ~ + 85)
Response time ≤1µS
di/dt accuracy >50A/us
Frequency bandwidth BW DC..100kHz

 

General data
Working temperature Ta -40℃~+85℃
Storage temperature Ts -45℃~+90℃
Relative tracking index >175
weight

≤850g

 

 

 

EN50155 1000A Hall Effect Current Sensor For Converter 0

 

Mechanical characteristics
No tolerance ±1 mm
Sensor installation method one (recommended)

4 hole and 4 notch

ø5.3mm

4 M5 steel screws

Sensor installation method two (recommended)

2 hole and 2 notches

ø 5.3mm

2 M5 steel screws

Recommended torque 3.5 N·m
Busbar size (recommended) 40.5×13mm
Secondary side electrical connection 3 ×M4 screw

 

 

Remarks
1. When the measured current direction is consistent with the direction marked on the sensor, the sensor output ISN is positive.
2. The secondary side connection line of the product is preferably a shielded line. The shielding layer is close to the product end and the connection line can be connected to the case, and the negative power supply or power supply 0V.
3. The verticality requirements for the mounting screw holes of the power sensor: it is required to be level 8 or above (or below 0.06) in the national standard.
4. The flatness requirements for the installation surface of the power sensor:
(a). The flatness of the large plane installation is national standard 11 or above (or the flatness is less than 0.25mm);
(b). The flatness of the installation surface is designed with small round bosses It is required to reach the national standard level 12 or above (or the plane fluctuation is less than 0.5mm);
5. No tolerance ±1mm is noted;

Contact Details
Xiamen Sincery Im.& Ex. Co., Ltd.

Contact Person: Elaine

Tel: +8619959273127

Send your inquiry directly to us (0 / 3000)

Other Products